Significant Economic Advantages

• 30 % to 50 % reduction in investment costs
• 10 % to 70 % reduction in manufacturing costs

Technical Advantages of EXJECTION®

• A minimum of required process pressure
• Avoidance of weld lines
• The most gentle processing of the melt
• Very low levels of molecular orientations and internal stresses

 

Flow Path Too Long?
At EXJECTION® not the melt has to overcome the whole flow path but the mould is simply moved to where it must be filled. Only the component section at the gate is filled. Without hot runner system and without cascade control unit.

Application of ribs at a U-profile? And some additional end-domes?

More freedom of design with EXJECTION®

 

Too Much Clamping Force?
Short flow paths cause only low required pressure. And the pressure is not effective over the complete component but only where it is actually filled. Result: A reduction of the clamping force required up to 90%.

Would you like to produce a long cable duct on a 50 tons injection moulding machine?
o 50 % re
EXJECTION® extends horizons

 

Injection Pressure Limited?
Only the actual section of the component is filled. More pressure is not needed, independent of the length of the component. By the way: Ribs, Domes, Snap Fits or similar functional elements are welcome for the EXJECTION® process

A water drain cannel out of PP with a length of 3 meters?

EXJECTION® opens new dimensions

 

Too Many Weld Lines?
EXJECTION® avoids weld lines due to multi point gating. The cavity is continuously filled through one single gate in one single shot. Result: No more problem with weld line strength.

A cable binder out of PEEK, length 1500 mm?

Get bound by EXJECTION®

 

Sensitive Decoration?
EXJECTION® allows the back moulding of the most sensitive materials. No matter if decorative films, textiles or organic materials such as wood veneer or leather. The connection is established gently without shear load of the decoration material.

A furniture profile with textile decoration or aluminium decor?

In Mould Decoraction with EXJECTION®

 

Melt Flow Effects?
With EXJECTION® the components are filled as homogenous as possible. Each section experiences the same history. EXJECTION® ensures the most uniform optical impression of metallic and effect pigmentation over the whole length of the component.

An entrance ledge with metallic effect pigmentation? A lamp cover with uniform scaffered light?

Bright prospects with EXJECTION®